Mesh enabler inventor
![mesh enabler inventor mesh enabler inventor](https://ablesacademy.com/images/upload/201611110396.png)
Keep in mind I believe it keeps as a default when you change that and you may have to go back and return it to whatever units you normally save in. stl file single select the file you want to open so it is highlighted and down at the bottom there is an Options button, click that and it opens a window, under Units there is an Import Units button, switch that to mm or in depending on how your file was saved out originally. stl was open, I click on the part, then right click, select Convert to Base Feature, I selected output to solid, OK and it was done and worked correctly.Įvan, What I did is when you go to open your. stl came in fine and matched what the customer had. So it sees the 12 as the value and the import doesn't know or care what it is but as soon as I changed my import option to mm the.
![mesh enabler inventor mesh enabler inventor](https://localhistory.richlandlibrary.com/iiif/2/p16817coll21:792/full/730,/0/default.jpg)
The customer exported in mm and I imported in inch. I opened a customer model and it looked correct until I made a measurement and it was 12" the real measurement was 0.473 or 12mm. stl file (inch or mm) when opening the file and change it in your options to match before opening it to keep it at the correct values. Make sure you know what your units are of the. This next comment doesn't really have anything to do with how the Mesh Enabler works other than how you import then use the Enabler: I can help a little if you run into problems.Seems to work fine now after Rocky fixed it up. Watch your memory usage the program can be memory intensive. Play with the 'target edges' number, i'm guessing you'll need at least 40k or more. I find that it works best if you do NOT use sharp features option, but you may need to. You'll have to tinker with it, but you can use it to generate really amazing quad meshes. Then you input the PLY file into the Instant Meshes program (it's fantastic btw, ). Make sure and turn off all the options EXCEPT for 'selection only', and 'apply modifiers' Then you output the fully triangulated (manifold hopefully) STL as a. It's not hard once you get the hang of it, unless of course your original STL is really messy. Sometimes you can fix them automatically (the 'make manifold' button), but often you have to manually do things. Use this to find any 'bad' triangles, edges, etc.
![mesh enabler inventor mesh enabler inventor](http://3.bp.blogspot.com/-BBE3WkUGnn0/VNnWM6244eI/AAAAAAAAAsk/fIrsTsNMz1c/s1600/Mesh_Enabler_3.png)
For Blender you will need to enable the 3D Printing Toolbox. I prefer Blender because it has much more control, but sometimes Meshmixer will do a decent enough job totally automatically. You can use Blender or Meshmixer to analyze and 'clean up' the STL if there are problems with the object. This is the source file I am specifically working on. I am hoping that someone might have an idea on how I can get these files converted. I am very inexperienced with this and tried to run the heal command and it didn't fix anything. I tried placing the stl into an assembly and shrinkwrapping it but it ends up with the same mesh feature. So I end up with a mesh feature that I can't do anything with. The issue I am running into is that when I run the Mesh Converter add-in for Inventor I get a composite body instead of a solid body. That way I can modify them and create an assembly with them. I am trying to take some STLs and convert them to solid bodies and save them as ipt files. I am using Inventor 2020 and know it best. Hopefully this is the right place to ask this question.